This close coiled and wire-formed contact : RC Spring probe is capable of
High GHz level transmission performance at every pitch available (down to
0.3mm) and low profile. RC Spring Probe is ideal for high performance
compression interconnect for many packages and board design requirement
with pitch (<0.4mm), thickness(<1.0mm) and High-frequency(37GHz@ -1dB)
Major application of RC Spring probe is for a low profile base IC socket,
board to board connector, virtual coaxial B to B connectors and supper high
frequency performance test IC socket and etc.
RC Scrub-R spring probe is an application design of torsional spring to electrical
contact element. It is capable of over 2 million mechanical/electrical contact
loading cycle in IC production test environments and useable of easy to replace
probes with no complicated assembly procedure. The feature of RC Scrub-R
design is best contact probe for JEDEC QFN and MLF applications especially due
to sliding contact motion, low contact resistance and high frequency
performance. So, Test Sockets of RC Scrub-R are best available for most handler
set-ups and offer exceptional high frequency performance.
RC Scrub-R also is best contact to be designed for low profile socket. This
contact feature is best fit for sliding in connector structure by side or offset
position, for instance of FPC connector, QFN or QFP socket with its high-
frequency (24GHz@ -1dB) characteristic and performance.
This ladder design structured stamping contact probe RC Connect-R
probe is best use for low cost type Area Array Connector Applications.
It is capable of providing exceptional high frequency performance
30GHz or over, in a highly configurable design. RC Connect-R probe
can be used for LGA or BGA application IC socket, and it is available in
both compression mount and solder down configurations.
This RC Connect-R can be used for the applications down to 0.7mm
pitch in area array and it is available in small volumes machined and
also for large volumes molded type base housing.